First, GTD bucket elevator Overview:
GTD bucket elevator after TD-type bucket elevator is widely used in various industries, I plant the introduction of development and production of a new generation of highly efficient bucket elevator. The model is a set of advanced technology, product economy, the use of maintenance reliability in one of the new products.
Second, GTD bucket elevator Features and uses:
1, GTD-type bucket elevator with throughput, and enhance high, smooth operation and long service life. Relatively dry bulk materials transportation vertical applicable, it can be widely used in building materials, chemicals, coal, power, ports and other transportation industries material handling systems.
2, GTD type of tape elevator to EP and steel cord conveyor belt as the traction member.
The device has two hoppers.
bd and dh type, which is a deep-bucket, generally applicable to transport dry, loose, easy throws, good mobility materials, such as cement, coal, gravel, grain and other materials.
ad and ah-type is a deep bucket bucket shallow than it applies to some poor liquidity. Slightly wet materials, such as sand, coal, chemical raw materials.
3, the head and tail and central cabinet of the machine were sealed, materials and dust rarely spills rarely cause environmental pollution.
4, the machine is mixing or gravity discharge, dig feeder.
5, the last round is assembled sprocket, rim combined with high strength steel bolts on the wheel, the rear sprocket wear, just want to change the rim, easy maintenance, saving raw materials, reduce maintenance costs. Wheel flange to the next round, completely changed the original double sprocket high cost, easy off chain defects.
6, the last round using the hypotenuse light wheel, the wheel has a self-centering effect can be avoided conveyor run.
7, this model has a material level in the lower and speed controller, the user can be made to take as needed to achieve electrical automatic control purposes.
8, the machine has two tensioning device, for lifting height of not more than 25m high models, generally used in tensioning screw, lifting height greater than 25m for models, selection gravity tension.
Third, GTD bucket elevator machine technical parameters:
GTD-type bucket elevator with ad-bucket conveyor capability table:
|
Bucket width/ mm |
160 |
200 |
250 |
315 |
400 |
500 |
630 |
800 |
1000 |
1250 |
1600 |
|
Hopper volume/ L |
2.6 |
4.1 |
6.5 |
10 |
16 |
25 |
40 |
61 |
102 |
161 |
255 |
|
Throughput (m/h) |
φ=100% |
45 |
60 |
95 |
135 |
210 |
290 |
460 |
655 |
1050 |
1500 |
2080 |
|
φ=75% |
34 |
45 |
71 |
101 |
158 |
218 |
345 |
491 |
788 |
1125 |
1560 |
|
Maximum lift height / m |
70 |
70 |
70 |
70 |
70 |
70 |
70 |
70 |
70 |
70 |
70 |
GTD-type bucket elevator with bd-type bucket conveyor capability table:
|
Bucket width/ mm |
160 |
200 |
250 |
315 |
400 |
500 |
630 |
800 |
1, 000 |
1250 |
1600 |
Hopper volume/ L |
1.9 |
2.9 |
4.6 |
7.4 |
12 |
19 |
29 |
47 |
74 |
117 |
184 |
|
Throughput (m³/h) |
φ=100% |
32 |
42 |
70 |
100 |
155 |
220 |
335 |
480 |
760 |
1090 |
1500 |
|
φ=75% |
24 |
32 |
53 |
75 |
116 |
165 |
251 |
360 |
570 |
818 |
1125 |
|
Maximum lift height / m |
80 |
80 |
80 |
80 |
80 |
80 |
80 |
80 |
80 |
80 |
80 |
GTD-type bucket elevator with ah-type bucket conveyor capability table:
|
Bucket width/ mm |
160 |
200 |
250 |
315 |
400 |
500 |
630 |
800 |
1000 |
1250 |
1600 |
|
Hopper volume/ L |
2.6 |
4.1 |
6.5 |
10 |
16 |
25 |
40 |
64 |
102 |
161 |
255 |
|
Throughput (m³/h) |
φ=100% |
30 |
47 |
65 |
100 |
145 |
205 |
350 |
475 |
720 |
1135 |
1800 |
|
φ=75% |
23 |
35 |
49 |
75 |
110 |
154 |
262 |
356 |
540 |
851 |
1350 |
|
Maximum lift height / m |
60 |
60 |
60 |
60 |
60 |
60 |
60 |
55 |
55 |
40 |
40 |
GTD-type bucket elevator with bh-bucket conveyor capability table:
|
Bucket width/ mm |
160 |
200 |
250 |
315 |
400 |
500 |
630 |
800 |
1000 |
1250 |
1600 |
|
Hopper volume/ L |
1.6 |
2.9 |
4.6 |
7.4 |
12 |
19 |
29 |
47 |
74 |
117 |
184 |
|
Throughput (m³/h) |
φ=100% |
21 |
33 |
45 |
75 |
110 |
155 |
255 |
345 |
520 |
825 |
1300 |
|
φ=75% |
16 |
25 |
34 |
56 |
82 |
116 |
190 |
259 |
390 |
618 |
975 |
|
Maximum lift height / m |
75 |
75 |
75 |
75 |
75 |
75 |
75 |
70 |
70 |
55 |
55 |
Note: The table is filled hopper volume aqueous product, material bulk density r = 1t / m3 Maximum lifting height refers to hoist wheelbase C. |
