First, HL type bucket elevator Product Overview
HL type bucket elevator is a centrifugal chain bucket elevator, lift the upper section with the running machine is part of the drive sprocket, tighten the lower section with a sprocket, intermediate housing driving means, check brake device component.
HL hopper type bucket elevator is interrupted arrangement, the hopper using the "Amoy borrowing" for loading, use the "centrifugal feeding Law" to uninstall. The hoist is suitable for conveying powder, solid shape and small block of non-abrasive materials, due to the traction hoist mechanism is an endless chain, thus allowing delivery of higher temperature materials.
Second, HL type bucket elevator machine main technical parameters ::
Maximum size is conveying the material must not exceed 40mm (HL300) and 50mm (HL400)
Model |
HL300 |
HL400 |
Hopper form |
S |
Q |
S |
Q |
Throughput(m³/h) |
28 |
16 |
47.2 |
30 |
Hopper |
Bucket capacity(l) |
5.2 |
4.4 |
|
110.50 |
Distance fighting(mm) |
500 |
600 |
Moving parts (hopper traction chain)kg/m |
24.8 |
24 |
29.2 |
28.3 |
Towing chain |
Type |
Forging endless chain |
Diameter round bar(mm) |
18 |
Pitch(mm) |
50 |
Breaking strength(kg) |
12800 |
Hopper speed(m/s) |
1.25 |
Drive shaft speed chain(r/min) |
37.5 |
Note: the table feed amount for hopper "S" system of law by the fill factor ψ = 0.6 is calculated; for hopper "Q" system of law by the fill factor ψ = 0.4 is calculated.
HL type bucket elevator maximum allowable lifting height H and the corresponding shaft power N
Model |
HL300 |
HL400 |
S |
Q |
S |
Q |
H(m) |
N(kw) |
H(m) |
N(kw) |
H(m) |
N(kw) |
H(m) |
N(kw) |
Material bulk density |
0.8 |
59 |
6.35 |
64 |
4.36 |
30 |
7.0 |
33 |
6.3 |
1.0 |
52 |
7.55 |
60 |
5.12 |
27 |
7.6 |
30 |
7.0 |
1.25 |
41 |
8.70 |
49 |
5.3 |
23 |
8.0 |
26 |
7.6 |
1.6 |
31 |
9.70 |
39 |
5.3 |
18.5 |
9.4 |
22 |
8.2 |
2.0 |
24 |
9.7 |
29 |
5.35 |
15 |
8.6 |
18 |
8.4 |
|
