First, NSE series bucket elevator Overview:
NSE series bucket elevator is a new type of vertical lifting equipment. It is suitable for lifting powder and small granular materials, such as: cement, coal, ore after crushing smaller. This is our introduction of foreign advanced technology similar products developed product, in the industrial countries, such conveyor is widely used to improve transport a large amount of powder and small granular materials.
Second, NSE series bucket elevator Features:
1, the transmission capacity. The series hoist is the lifting machine similar cross-sectional dimension of the largest transport hoist, lifting capacity of 100 ~ 1000m3 / h.
2, to enhance a wide range. Such hoist on the kind of materials, performance requirements and less. Not only can enhance the general powder, small granular materials, but also can improve the larger abrasive materials. It requires material temperature ≤200 ℃.
3, the drive power is small. Adoption into the feeder, induction discharge, large capacity hopper-intensive layout. Almost no feed back when lifting and excavating the material and, therefore, invalid less power than the chain hoist power savings of about 30%.
4, long service life. Hoist feeding formula using inflow, without using bucket digging materials, extrusion and collision between material rarely occurs. This machine is designed to ensure that the material in the feed, hoist unloading when few scattered, reducing mechanical wear and tear, the use of high-strength wear-resistant plate chain conveyor, greatly extending the life of conveyor and hopper. Under normal use, conveyor life of more than three years.
5, high lifting height. Smooth operation of the hoist, and the use of high-strength wear-resistant plate chain conveyor, so you can achieve a higher lifting height. Under rated throughput, lifting height ≤50m.
6, sealing, and less environmental pollution.
7, good reliability. Advanced design principles and processing methods to ensure the reliability of the machine running trouble-free time more than 20,000 hours.
8, operation, easy maintenance, less wearing parts.
9, structural rigidity, high precision. After casing-pressure welding, rigid and beautiful appearance.
10, lower overall costs. Since saving energy and maintenance, low cost.
Third, NSE series bucket elevator Dimensions:
Fourth, NSE series bucket elevator machine technical parameters:
|
Model |
Lift amount m³/h |
Hopper volume L/m |
Filling rate% |
Chain speed m/min |
Max Block of material (mm) Percentage% |
|
10 |
25 |
50 |
75 |
100 |
|
NSE100 |
170 |
72.5 |
60 |
65.4 |
35 |
30 |
20 |
15 |
10 |
|
NSE200 |
230 |
96.8 |
60 |
65.4 |
35 |
30 |
20 |
15 |
10 |
|
NSE300 |
308 |
120.8 |
63 |
65.4 |
35 |
30 |
20 |
15 |
10 |
|
NSE400 |
360 |
141.5 |
65 |
65.4 |
50 |
40 |
30 |
25 |
20 |
|
NSE500 |
480 |
188.2 |
65 |
65.4 |
50 |
40 |
30 |
25 |
20 |
|
NSE600 |
619 |
240.8 |
65 |
66 |
50 |
49 |
30 |
25 |
20 |
|
NSE700 |
721 |
280.1 |
65 |
66 |
65 |
60 |
40 |
35 |
30 |
|
NSE800 |
825 |
320.5 |
65 |
66 |
65 |
60 |
40 |
35 |
30 |
|
NSE1000 |
1007 |
391.2 |
65 |
66 |
65 |
60 |
40 |
35 |
30 |
Note: The maximum amount of lift is the fill factor is 0.65, calculated at 66m / min chain speed of |
