First, JS humidifier (dry) biaxial mixer Overview:
Humidification (dry) biaxial mixer using two spiral-shaped symmetrical axis synchronous rotation, in the transportation of dry ash powder material mixing with water, even wet dry ash powder material, to not run dry ash humidification material without seepage drops the purpose, in order to facilitate the wet ash loading transport or transferred to other transportation equipment. Humidification biaxial mixer is a new type of dry ash humidification equipment, its features are: large output, stir, no dust pollution, noise, is more advanced mixing equipment.
Ash ash hopper portion humidification (dry) biaxial mixer for power plants and other sectors as water wet mixing and conveying of powder, also used in chemical, mining and other materials containing solid particles humidification, mixing and transport .
Second, JS humidifier (dry) biaxial mixer works
Material by electric air lock feeder into the box from the inlet, two leaves were left and right spiral distribution of leaf axis synchronous rotation, and the materials have been wet continuously introduced discharge port.
Third, JS humidifier (dry) biaxial mixer structural features
Biaxial mixer mainly consists of the housing, the screw shaft assembly, drives, piping, cover, chain cover and other components (see random outside for map), the specific structural characteristics are as follows:
1, high strength, the materials are fully mixed, so as to improve the degree of homogeneity;
2, the use of the novel rotor structure, the minimum gap between the rotor and the housing can be adjusted to be close to zero, effectively reducing the amount of residual material;
3, the machine built with added fat pipe, the overall structure is more reasonable, beautiful appearance.
4, wear resistance, low energy consumption, long service life, convenient operation and maintenance.
Fourth, JS humidifier (dry) biaxial mixer Technical specifications:
|
Model |
JS400 |
JS500 |
JS600 |
JS700 |
JS1000 |
|
Production capacity(t/h) |
20-40 |
20-50 |
30-80 |
40-100 |
120-200 |
|
Slot length(mm) |
2500 |
2500 |
3000 |
3000 |
3000 |
|
Leaves turning diameter |
φ400 |
φ500 |
φ600 |
φ700 |
φ1000 |
|
Motor Power(kw) |
11 |
15 |
18.5 |
22 |
30 |
Note: Other models can be produced according to user needs |
