In order to ensure the normal operation of the self discharging iron remover, the daily maintenance method is essential. Under the action of the magnetic field, the magnetic ore particles gather to form "magnetic clusters" or "magnetic chains", move to the magnetic field under the action of the magnetic force in the pulp, and adsorb on the cylinder. 1. When using the self discharging iron remover, the handle and maintenance device must be checked regularly to ensure that the handle is flexible and the limit block can be locked automatically. 2. Test the actual lifting capacity of the self discharging iron remover every year, and check whether the main parts of each department are in good condition. The iron remover can be divided into manual iron unloading, automatic iron unloading and programmed iron unloading according to its iron unloading mode. Due to different application occasions and magnetic circuit structures, various series of products have been formed. Maintenance and repair shall be carried out by technicians according to the instructions. It is not allowed to approach the self discharging iron remover for welding fit. Do not tighten the handle if it is placed on a non-magnetic material. Overload lifting is prohibited. 3. The adjustment of operation control shall be carried out by the company according to the actual situation of the fire prevention parts or places, and the self unloading iron remover is prohibited. The fence shall be installed outside the range of iron dropping pieces to prevent personnel from approaching the operation. 4. When moving and using the electromagnetic iron remover, in order to better ensure the performance and service time of the self unloading iron remover. The iron remover can be divided into manual iron unloading, automatic iron unloading and programmed iron unloading according to its iron unloading mode. Due to different application occasions and magnetic circuit structures, various series of products have been formed. Please prevent the working face from violent vibration and impact. After use, apply anti rust oil on the working surface, and do not put it directly on the ground. It is recommended to place a layer of non magnetic gasket on it.
Copyright：Linqu Huazhong Jixieshebei Co.,Ltd. Add：Weifang, Shandong Linqu Economic Development Zone Technical support：Seahigh Network
phone：13455690699 tel：086-0536-3450699 fax：086-0536-3472569 E-mail：sdjx1314@163.com
