(1) magnetic separator machine motor overheating and its sound is not normal. Magnetic separator machine motor overheating and its sound is not normal: 1) bearing lubrication is bad or badly worn; 2) fan leaves fall off or wear and tear; 3) switch circuit poor contact or disconnection run single phase; 4) the voltage is too low. (2) The magnetic separator is not normal operation sound, cylinder stuck by obstacles, and even the cylinder can not be rotated, bottom tank fibrillation. The reason is often the objects of the base box stuck, then there are magnetic blocks off the cylinder rattled serious cause the drum skin pierced. At this time should be shut down for maintenance, troubleshooting. (3) reducer overheating The reason: 1) insufficient oil or oily bad; 2) gear and worm wear too much, or mesh well; 3) bad or badly worn bearing lubrication.
Copyright：Linqu Huazhong Jixieshebei Co.,Ltd. Add：Weifang, Shandong Linqu Economic Development Zone Technical support：Seahigh Network
phone：13455690699 tel：086-0536-3450699 fax：086-0536-3472569 E-mail：sdjx1314@163.com
